- Submersible pump/motor system for CNC coolant applications
- 280 psi, 37 gpm max flow rate
- Designed for super easy user installation
- No firmware updates are needed
- Use M03 and M04 as normal in all your existing programs
- Very quiet operation
- Safe: IP68 waterproof grade motor, Industrial grade GFI included with control box
- Rigorously being tested in our shop on a CNC lathe to over 100,000 on/off cycles
- Operating temperature up to 110° F
- System includes pump/motor assembly, control box, and all necessary cords, plumbing, and hoses needed for operation – everything you need in one package!
- LIST PRICE: $4,900 (free shipping)
High quality materials used
- Stainless steel housing, shaft and coupler
- Delrin Impellers
- Polycarbonate Deflectors
- Buna N seals
Submersible motor
- Sealed and pressurized with dielectric fluid
- Rated to IP68 waterproof grade
Control box rated for 10 million on-off cycles
- Tested to over 100,000 on-off cycles
Rigorously Tested
- On-off cycle test: Over 100,000 cycles on our CNC lathe
- Thermal test: 115° F with no pressure loss or added power draw
- Exposure test: long term exposure to cutting fluid
Benefits
- High pressure and flow are imperative to drastically lower production times – turn seconds into minutes
- Fast chip breaking and evacuation
- Drill super-fast – no pecking
- Turn stringers into chips – high pressure breaks the chip
Everything You Need is Included!
(1) Pump and motor assembly
- 3HP, 230V single phase sealed motor
- 4” dia, 18-stage pump
- ETL certification, IP68 waterproof grade motor
- Stainless steel frame, shaft, coupler
- Buna seals, Delrin impellers, polycarbonate deflectors
- Pump assembly mounting feet
(2) Control Box
- Water resistant, outdoor rated, carbon steel box
- Industrial grade electrical components
- Safety factor of two electrical ratings
- NEC rating: industrial grade, ground fault (GFCI) protected
(3) High pressure hose, valve, pressure gage, and associated plumbing
(4) Crow’s foot tools for changing hose
(5) Free sample of anti-foam
Install Our System in 6 Easy Steps:
(1) Simply unplug and remove your old pump and hose. Thoroughly clean tank, coolant trough on machine, and conveyor.
(2) Drop in our pump, connect our high-pressure hose to machine
(3) Mount and ground our Control Box
(4) Connect control box to your auxiliary power box – 230V, single phase, 30 amps, and connect to facility main breaker box
(5) Plug in electric cords
(6) Charge tank with new coolant
That’s it!
We can install for minimal fee if you like.
Personal Attention
- Call or email our design engineer directly with questions or comments
- Free on-site visits to help you assess integration of your CNC machine with CASSCO high pressure system
Demos
- Meet the design engineer in our shop and see system in operation – Call or email to schedule
100% Guaranteed
- 30-day unconditional money-back return
- 12-month warranty – Repair or replace at no cost to you